My network (currently 1x GW, 2x dist switches, and multitude of access
switches) is set up for mclag. Our ultimate goal is to have a full HA
system. Our 2nd gateway hasn't been added till I resolve the layer 2
issues. Both dist switches connect to th...
We got our selves a pair of FS-T1024E and the far end it'll be connected
to is a FS-1024D. Unfortunately the far end will only go as high as 10G
on any of its ports. From the 1024E's configs, it will only support
100/40G and then 10G via breakout. Is...
Just a note on this old thread, if you're having issues getting the kdc
proxy to show up, it will only do so when you're offnet and no direct
line of sight to the DC. If it doesn't show up, you'll want to check 1)
url is correct, 2) common name of th...
So for those wondering, and for posterity, the issue stemmed from the
fact I created the MCLAG ICL between my two switches, rather than
letting the switch do so itself. Initially when I configured this, the
switches created their own mclag however I ...
Our fortigate is in (HA) though the second fortigate has not been
introduced. It's defacto operating in standalone regardless of the "HA
Primary" shown in the gui. The issue precedes us movign the fortigate
into HA - it's been going on for a long whi...
Apologies for the late reply. I need to check more frequently. Switches
are all fortigate integrated and not standalone. Here's the config on
one switch.config switch trunkedit "_FlInK1_MLAG0_"set
port-selection-criteria src-dst-ipset description ''s...
