Hi Guys , I have strange issue here. I lost all mgmt access both from
WAN and LAN after changing the https and http mgmt port to 8443 and
8080. I can only ping the interfaces. So i consoled in and reverted the
changes back to port 443 and 80. But sti...
Hi:I have a Fortigate 40F setup in office with its WAN conencted to the
interent on a public IP , LAN connect to office LAN network 10.61.x.x
network I and followed this guide,
https://community.fortinet.com/t5/FortiGate/Technical-Tip-How-to-establis...
thank you - SSLVPN is not using the same port as admin HTTPS
access#config vpn ssl setting#show full | grep port-> the line 'set port
xxx' should not be 443-> if it is, I would suggest changing it if SSLVPN
is not in use.-> if SSLVPN is in use, then ...
thanks, please see logs below, i have hid my WAN ip with
xxx.xxx.xxx.xxxFortiGate-40F # id=65308 trace_id=1 func=print_pkt_detail
line=5895 msg="vd-root:0 received a packet(proto=6,
220.240.195.225:53561->xxx.xxx.xxx.xxx:22) tun_id=0.0.0.0 from wan. ...
hi Thanks guys , confirming no telnet or ssh either.@akumarr I tried sh
full | grep set admin-sportsh full | grep set admin-port Got below:
FortiGate-40F # show full | grep set admin-sportUsage: grep [-invfcABC]
PATTERNOptions:-i Ignore case distinct...
hi All, thanks all for making this work It's all working now after
adding the static route for the LAN interface with higher priority than
WAN route. It feels wonderful ! :D
