Fortigate 80F 6.4.10 with 2 WAN interfaces into an SD-WAN.WANs are set
up to switch to "secondary" if "primary" is down .. and back to
"primary" when it is up.I want to set up a PC to continuously ping (with
a script) and traceroute out through each ...
Fortigate 80F / 6.4.10 / FSSO with ADI'm testing a new configuration.The
workstations under test are accessed via remote access like GoToAssist
or SplashTop.It appears that unless a workstation has a User logged on,
it may not be visible in the remot...
Fortigate 80F 6.4.10 single domain / 3 subnets / one DC per subnet.We
have Security Fabric / External Connectors / AD Connector set up with 3
AD connectors, one for each DC.I see that there are Connector Objects
for each AD Connector - we have made t...
I'm looking for a definitive list of settings for Windows firewall when
using FSSO in common situations:- Collector Agent running on Domain
Controllers: so, Domain Controller Firewall Settings- Collector Agent
running on a separate Windows computer: ...
#Fortigate 80_F 6.4.In Users and Devices, an entire subnet of users is
missing. There are 3 subnets: 1,2 and 3. There is a DC on each of them.
The Fortinet is on subnet 1. I'm using FSSO Method. I don't see any User
Names from subnet 1 where I'd expe...
I think I fixed it but was it the best method?I have a URL list that
will allow all the needed URLs for remote access services.I had been
requiring local addresses AND local Users. Removing local users and
keeping local addresses fixed the problem.
I'm still a bit worried as our configuration / architecture isn't what
was advised.Our collector is running on one of the DCs. Why is that not
advisable? It seems to be working fine.
@distillednetwork Thank you! Very helpful to get the terminology
straightened out!I'm not grasping all of this yet. I have DC Agents on
all the DCs.I have FSSO connectors on the Fortigate.I have an FSSO Agent
installed on all of the DCs but, it appea...
