Description This article describes configuring Quality of Service (QoS)
for VoIP traffic. This knowledge-based article provides step-by-step
instructions on enabling QoS for VoIP services utilizing SIP port 5060
on a FortiGate firewall. Scope FortiGa...
Description This article describes a configuration scenario where
customers configure the SSL VPN address range to be the same as the
Internal subnet and cannot access the internal servers. Scope FortiGate.
Solution Configuring SSL VPN in FortiGate r...
Description This article describes why the error 'Authentication type
mismatched' is seen on FortiGate OSPF debug and Cisco when establishing
OSPF adjacency between FortiGate and Cisco. Scope FortiGate. Solution If
authentication is enabled in OSPF a...
Description This article describes how to handle connections that are
down/flapping between FortiGate and MCLAG FortiSwitches after upgrading
the switches. Scope FortiGate, FortiSwitches. Solution When FortiGate
and FortiSwitches are connected and se...
Description This article describes how to resolve intermittent
disconnection of the LTE modem on FottiGate-3G4G devices with Sierra
Modem. Especially with Sierra modem EM75xx. Scope FortiGate-3G4G 40F,
60F, 70F. Solution In the crash log, the WWAN in...
Hi Omkam, - To view data in Fortiview, disable auto-ASIC-offload, which
is enabled by default. -
https://community.fortinet.com/t5/FortiGate/Troubleshooting-Tip-FortiGate-Logs-are-not-displayed-in/ta-p/194193
Hi, I think you are missing a policy. This Kb might help.
https://community.fortinet.com/t5/FortiGate/Technical-Tip-Dialup-IPsec-traffic-forwarding-to-site-to-site/ta-p/192062
Routing behaviour can be changed by modifying priority and distance. You
can follow the KB below to understand the behaviour
https://community.fortinet.com/t5/FortiGate/Technical-Note-Routing-behavior-depending-on-distance-and/ta-p/198221