You do not have to change your core switchport in a layer3 port.You can
create a dedicated Vlan and SVI (switch virtual interface). Just define
a small network (/29 by example) conf t vlan 99 name
Cisco_to_FortiGateint vlan 99 description To_Fortigat...
Hi Ghasem Check your ARP tables when this issue occurs.On the FGT: # get
system arp | grep 192.168.1.2# get system arp | grep
Is the association bet...
Your screenshot is confusing because you get a private IP address in the
remote host column on your SSL-VPN monitor. On your SSL-VPN Settings, is
your interface in listenning connected to internet with a public IP
I had a similar issue but not on microsoft.com with FortiOS 6.2.8 and
6.4.7.As you, I used the SSL deep inspection and I added a lot of
exempts for a workaround.Recently, after reading the 6.4.8 release notes
I saw the bug ID 750551 DST_Root_CA_X3 ce...