Technical Tip: How to create FortiGate captive por...

hazim · 10-22-2024

Description This article describes how to delete UDP’d on FortiGate Cloud. Scope FortiGate Cloud. Solution The UDP’d in FortiGate Cloud indicate that they have been un-deployed. If the devices are no longer needed, it may display the show UDP’d. This...

hazim · 10-15-2024

Description This article describes how to troubleshoot Debug showing 'failed to match vid-1' on VIP configuration and match implicit deny. Scope FortiGate. Solution When seeing the output debug below when troubleshooting VIP: Debug output: FGT1 # 202...

hazim · 09-10-2024

Description This article describes that SSL VPN cannot connect due to a redirect host check issue, but no host check is turned on. Scope FortiGate v6.4, v7.2 and above. Solution User groups are assigned in the SSL VPN portal and policy. However, in s...

hazim · 08-27-2024

Description This article describes how to create a Captive Portal with LDAP users via policy-based. Scope FortiGate. Solution Go to User Groups to create LDAP based on the attribute Organizational Unit (OU) as below: Go to User Groups -> Create New. ...

hazim · 05-06-2024

Description This article presents the behavior of the FortiSandbox Files FortiView monitor in FortiGate. Scope FortiGate v7.2 and v7.4. Solution When configuring FortiGate with the FortiGate Cloud Sandbox, it is possible to send the scanned file to F...

hazim · 10-22-2024

Hello @5q46n2te8jPWJY You can run debug flow to see the traffic outgoing/incoming to verify: https://community.fortinet.com/t5/FortiGate/Technical-Tip-Using-filters-to-review-traffic-traversing-the/ta-p/195025

hazim · 08-27-2024

The backup file essentially contains the entire FortiGate configuration, allowing it to be fully restored in case of a failure or when migrating configurations to another device. The configuration includes system settings, routing, firewall objects, ...

hazim · 03-31-2024

Hi, For SSLVPN MFA with token you can refer to this guide for more information:- https://docs.fortinet.com/document/fortigate/7.4.3/administration-guide/183204/ssl-vpn-with-fortitoken-mobile-push-authentication Regards, Hazim

hazim · 03-31-2024

Hi ElPresidente, For your case, you can run debug for IPsec and authentication to see the running process when the user connects to the VPN. Troubleshooting on IPsec:- https://community.fortinet.com/t5/FortiGate/Troubleshooting-Tip-IPsec-VPNs-tunnels...

hazim · 03-31-2024

Hi James, For sandbox, there are several options, including on-prem or cloud-based. This depends on licensing that you purchased, and you can refer to this link for more information:- https://www.fortinet.com/support/support-services/fortiguard-secur...

User Statistics

User Activity

Technical Tip: How to delete UDP’d on FortiGate Cloud

Troubleshooting Tip: Debug flow show - "failed to match vid-1" on VIP configuration.

Technical Tip: SSL VPN is unable to connect due to '553 redirect to hostcheck'

Technical Tip: Creating Captive Portal with LDAP users via policy-based

Technical Tip: Behavior of the FortiSandbox Files FortiView monitor in FortiGate

Re: Issue with Cross-VLAN Communication over VXLAN/IPSEC between Two Sites

Re: Backup fortigate

Re: Newbie: User authentication for VPN SSL Portal with FortiGate

Re: cannot from VPN connect from home, works when tested locally

Re: Comparison of Fortiguard Sandbox with Fortisandbox Cloud.

Technical Tip: How to create FortiGate captive por...

Technical Tip: Prevent OSPF routing refresh when c...

Technical Tip: Fortigate Fabric connectors Sandbox...

Technical Tip: FortiGate logs with 'verdict: Submi...

Technical Tip: How to configure Safe Search on For...

KCS