First off, I hope this forum is the correct place for this thread. If
not, I apologize and an admin can feel free to move it to its correct
location. Thank you! We were using a Cisco firewall when I started with
the company, back in April. When I sta...
config webfilter profile edit " primaryWebProfile" set options
contenttype-check config web set content-header-list 1 end next end
Okay, just got done doing this commands, and it appears to have greatly
improved my YouTube loading times. Have tested ...
config webfilter profile edit " primaryWebProfile" config http set
options contenttype-check end config web set content-header-list 1 end
next end For the sake of not messing anything up, I stopped at the "
config http" When I tried the command it sa...
Bill, Went in to the firewall policies and enabled the viewing of the
web filter profiles, and we do have one in place, that looks like it is
currently applied to our entire internal network and our guest wireless.
Go to the UTM profiles and looking ...
I just tried this: CLI Syntax: config webfilter content-header edit 1
set comment ' ' config entries edit " video/.*" set action block next
edit " audio/.*" set action exempt next end set name " weblist-01" next
end from the article posted above, but...
Sorry for the delay in responding about this, was out of town for a few
weeks. Anyways, here is the info about our firewall: FortiGate 110C
Firmware Version: v4.0,build0496,111108 (MR3 Patch 3) Speed test:
Dwn=14.85 MBps / Up=5.70 MBps Approximately ...
