Let's see if I get a response... Does anybody have instructions on how
to replace the internal hard drive on a FortiRecorder-100D?
Additionally, does anyone have the list of supported hard drives (make,
models) for replacement? Thanks in advance for ...
Hey everybody, Is it possible to add the interfaces from a FortiSwitch
FS-108D-POE (3.6.2) to a software switch on a FortiGate-60E (5.6.2)? I'm
assuming no, as I've doing some pretty extensive Googling and came up
empty. Or, does the 60E just not sup...
Hey everybody, Is it possible to add the interfaces from a FortiSwitch
FS-108D-POE (3.6.2) to a software switch on a FortiGate-60E (5.6.2)? I'm
assuming no, as I've doing some pretty extensive Googling and came up
empty. Or, does the 60E just not sup...
The environment is this: FortiGate 60E (5.6.2)FortiAP-224D (5.6)HP
LaserJet m425dn (running latest firmware)Mac OSX 10.12.6 The printer is
connected to the "internal" switch on the FortiGate. The FortiAP is also
connected and being managed via the Fo...
I'm new to the world of Fortinet, so please bear with me... On a
FortiGate 60E (running 5.6.2), is there a way to add all IPS signatures
at once, instead of having to go page by page and selecting them. Or am
I missing the point in that you only want...
The use case was to basically extend my FG60E switch ports to the
FS-108D-POE so that I wouldn't have to mess with VLANs, multicast
policy, etc. I had separate broadcast domains for wireless, Fortigate,
and Fortiswitch clients, but due to my lack of ...
Well, mine finally stopped spinning. I had to power down the FortiGate
in order to move it to a new location and upon power up, it's now
showing the WAN IP. Strange... bks
bdouble wrote:I am having this exact same issue with a 60E and 221B AP,
and an HP printer connected by ethernet to the internal interface. My
firmware is 5.4.5. I was able to "fix" the issue. I ended up creating a
software switch on the FortiGate-60E...
