Hello all, i have an issue with two Fortigate 60B configured in HA
active-passive mode heartbeat interfaces: - WAN1 connected through a
switch with dedicated vlan ports (untagged) - WAN2 connected directly
with a cross cable Randomly several times a ...
Hi all i have a Fortinet 60B 4.0MR1P9 with a /30 public ip subnet
configured on wan1. Now i need to publish some servers connected to the
DMZ interface with static nat 1-to-1, so i asked my provider to assign
us a secondary subnet of 8 public ip addr...
Ok, yesterday i' ve upgraded the firmware of the cluster to 4.0 MR2
Patch 12 I' ll wait to see if the problem still persist. In the meantime
there' s a new problem, the units do not synchronize between them. Here
is the console log: company-fw2 login...
Hi ede_pfau Please note that there have been changes from 4.1 to 4.2,
please read the Release Notes carefully! Also, it would help if you are
onsite while upgrading. If the cluster breaks during the upgrade there
is a risk of loosing the slave. What ...
