Hi all We have a 1000D device from our provider, how is this done with
the air flow on this device? Is this something which comes
"out-of-the-box" or can this be changed? E.g. another fan module which
changes the direction? Does someone has a link to...
Hi all I am trying to send all the log message I get in Logging -> Log
Access -> Logs to a syslog server. But none of them arrived. I have the
syslog server configured with the IP address, the level is Debug (but
also tried with Informational, there ...
Hi all A new behavior came up during a penetration testing that all
published application (publishing is on a Cisco ASA) replies on the tcp
ports 2000 and 5060. During the investigation we figured out that not
the ASA replies on them, that this is th...
Hi all We soon will start with Fortinet NGFW devices in our company. We
have an internal discussions about how to protect the inside -> out
traffic which pass this new Fortinet. Until now, we had a Cisco device
with "ip inspect" or "ZBFW" enabled. Bu...
That's true :-). Such simple things, either it is a bug or than it is
solved after a reboot. Indeed, this FA now works perfectly for us to act
as Radius proxy/LDAP authentication which forwards now all the request
to a Microsoft NPS server and from t...
Hi seadave Thank you for that one. I then tried the ping it worked. At
the end I reloaded the box as requested, this now finally brougut back
the syslog messages. So once more, a boot is always a good option! This
hint together with enabling syslog o...
Hi seadave Many thanks for your reply. You did a perfect first catch,
the enabling of Syslog in the interface. I was not aware of that one, so
I enabled it. Unfortunately I still don't see any packets arriving on
the syslog server. The server uses ud...
Hi Toshi Many thanks to your reply. Yes, there are these policies
configured with the ALG feature, of course. But my question is more how
this can be disabled. Based on the answer I got from my provider this is
not possible, the only workaround would...
