Description This article describes the behavior of FSSO polling
agentless to get the IP address of the machine where the user
authenticates. Scope FortiGate. Solution To show the behavior, a wrong
IP address has been set for the hostname machine1.for...
Description This article describes how to allow traffic when only using
the same logical interface for ingress and egress with source and
destination IPs from different networks. Scope FortiGate 7.0.14 and
later, 7.2.6 and later, 7.4.0 and later. Sol...
Description This article describes how to identify a specific session
that is not sync from the primary to the secondary FortiGate unit in an
HA setup. Scope FortiGate. Solution In this example, SCTP trafficw ill
be used. In cases where the SCTP traf...
Description This article describes solutions to control Firewall Policy
in FortiGate to apply traffic, based on IP address and Username. Scope
FortiGate. Solution To apply a Firewall Policy traffic based on IP
address and Username, configure an authe...
Description This article discusses the IPSec Tunnel Debug Flow error
'offloading-check failure with reason_code=1.' Scope FortiGate. Solution
If a ping or any traffic to pass through the IPSec VPN tunnel is
initiated, the following log entry in the d...