I wondered if anyone had successfully been able to setup a VPN to the
StorageCraft Cloud. They list the VPN requirements as:Phase 1
settings:OptionSettingAuthentication MethodMutual PSKIdentifierIP
address of the External WAN IP addressPeer identifie...
I hope this is the correct location for this post. I have a Fortigate
60C running 5.2.2 and a Verizon Wireless USB 4G modem I'd like to get
setup. The model is a Pantech 295. I see that 295 is supported on the
FortiExtender but not listed as supporte...
I'm trying to put a Polycom device behind my firewall with a VIP NAT
overload. I can get it working so that I can browse the web interface
but run into issues with one sided Voice/audio. here's my config. config
firewall vip edit "War Room Polycom - ...
I think i'm being slow here so here goes my post.Fortigate 1: Internal
172.10.100.1 - DHCP Server 172.100.100.100-110Fortigate 2: Internal
192.168.40.1 - DHCP Server Relay, 172.100.100.1 IPSEC Both Fortigates
are connected together via IPSEC VPN with...
We' ve been having issues where we have our Fortigate connecting to a
Meraki MX devices. The VPN tunnels connect and work great most of the
time but we have issues where all the Tunnels to the remote Meraki
devices stop passing traffic. The tunnels a...
romanr wrote:Hi, we use the Forticloud multi tenancy feature. But only
for SME cutomers utilizing the free Forticloud version. This is nice for
use for those customers who can live with the limited logging &
reporting. For a proper installation to ma...
After putting off getting this up and running I've finally decoded the
setup. The key was disabling the peer id. When I removed it the VPN
tunnel came up and started to work correctly. config vpn ipsec
phase1-interface edit "SCCloud-VPN" set interfac...
I did something similar with a SSL VPN setup. Everyone hit the SSL VPN
and got different portals depending on their group membership. Since
they were on different portals they got different DHCP pools. I then
used these pools to give them or not give...
We did end up getting a 290 off of eBay it it seemed to work well. In
our area we only had 3G so we had to lock down the modem to 3G instead
of 4G. It worked well enough but we ditched it for a T1. Every time it
failed over we got a non-unique public...
It wasn' t enabled. Here' s a screen shot of my current setup which is
working with the Black Hole Routes.
http://docs-legacy.fortinet.com/fgt/html/fortigate-admin/wwhelp/wwhimpl/common/html/wwhelp.htm?context=fgt&file=Router_Static.15.8.html
edit 23...
