Hello, So after reading through the traffic shaping documents, I believe
I understand the behavior of traffic shaping/prioritization as follows:
So there's two ways to control packets: Queuing[ul]There are 6 software
queues (labeled 0-5) with 0 being...
Hello all, I am trying to figure out the best way to whitelist websites.
We have too many (10+) different web filter profiles and as many
AppControl profiles that adding URL's to these would be too cumbersome
(even from a Fortimanager). I want to cre...
Hello, So I have updated our FAZ 1000D from 5.2.0 to 5.2.2 and I can not
view my custom reports and Event Handlers anymore. However, the reports
are still scheduled and the event handlers still catch "events". Has
anyone had any similar issues to thi...
For reference, all information pulled from these two sources of
documentation:https://help.fortinet.com/fos60hlp/60/Content/FortiOS/fortigate-traffic-shaping/TS_About.htm#Importanhttps://docs.fortinet.com/document/fortigate/6.0.6/handbook/822191/traf...
So the upgrade to 5.4.5 fixed both the Windows 2012 ECN issue and we are
getting good throughput with AES256/SHA256 with NPU offloading. Can't
believe that worked haha.
Hey all, Jumping into this thread. We have exact setup as OP here with
two 60E's over a 1Gbps private p2p line. When encryption is enabled
(offload disabled because of Win 2012/ECN issue) we get about 100 Mbps
tops. That's with AES256/SHA1 on phase1 ...
I have a 1500D on 5.4.3 and its configured the same exact way and it
works (although we are running VDOMs). Are you sure its not something on
the network? Can you plug a laptop directly into the mgmt1 port on same
subnet and ping it?
I ran into the same problem and I came away with some possibilities for
you. Our head-end office used 192.168.1.0/24 and, as you know, many
users have the same home network subnet. I followed the same guide you
did and had the same problem where I co...
