I'm looking to create a Point-to-Point VPN between a Fortigate
800(version 3.00) and a Fortigate 100D(version 5.00). Is that possible?
It appears the option I typically select for VPNs on my 800 are not on
the 100D. I believe this is because the 100D...
How do you configure VLANs per port on a 100D running version 5.0? I
found a video where it shows you how to do it under 4.0 by going to
System > Network > Interfaces. I'm unable to associate the newly created
VLAN with a port, I can only assign it t...
I found a directory on our network with a bunch of .out files for all
our Fortinet units. Are these backups? I though the backup extension was
.conf I' ve never seen a .out before. It appears this extension is some
kind of generic output file. Possib...
We currently aren' t using VPN for a few users, and I was just curious
if I can log the RDP sessions? I want to keep track of who is logging in
to our system. I know RDP session' s isn' t the normal thing you would
log, but I was hopping there was a ...
I' m looking to configure a DMZ port on my Fortigate, but I' m not
exactly sure how to configure it properly. I' ve done some searching
online and to my surprise I haven' t found to many articles regarding
the topic on Fortigate firewalls. Can somebo...
I can't get this working between the 100D and the 800. They each have
different settings and options. What I did with the 100D, was put two
ports under a Physical Interface Member for the HSRP setup we have at
the colo. My question is, can I do this ...
I finally came back to this project, and I thought I had it today, but
something weird is going on. I was able to bring up the tunnel, but now
I can't bring it down. When I attempt to bring down the tunnel on either
the 100D or the 800, it still stay...
Very good to know. I figured it would, but when I was greeted by the new
options I didn't know what to do. I'll have to read up a little on
creating the 100D end. Thanks for confirming As for the version, we are
running 3.00 build 0479,070309. It's b...
Jeff_FTNT wrote:You may try to release port from "virtual-switch " Try
below steps:1.purge policy2.purge DHCP server and routes3.Delete default
"virtual-switch " config sys virtual-switch delete LANend Then you can
assign VLAN on port released from "...
