I have an FGT60D running DHCP on the Internal interface serving IP
addresses to about 120 clients. Every few weeks someone using Windows
will report to me that they are seeing a pop-up message that they have
an IP address conflict. This happened this...
Hi all, I'm running a FGT60D with 5.2.2. I deployed two FAP-221C units
about six weeks ago and they mostly been working well. I'm a bit
mystified by the Radio Resource Provision function as explained in the
"Deploying Wireless Networks for FortiOS 5....
Last night I performed an upgrade of my 60D from firmware 5.0 to 5.21.
The upgrade seemed to go successfully with no immediate indication of
troubles. However, today when I tried to click the FortiCloud ' Launch
Portal' button from the FortiGate' s d...
After receiving a lot of flack from users and our CEO, I finally came up
with a working solution, which was to abandon the FAP-221Cs for a
solution from another vendor. It's certainly not the solution that I was
looking for, but after nine months of ...
Curious if anyone has made any progress with these issues in the last
few weeks. I have two FAP-221Cs (v5.2-build0229) controlled by an
FGT-60D running v5.2.2,build642. Throughput seems to be fantastic for
5Ghz clients, however, most clients on 2.4Gh...
In response to YtseJam's question, I went back and looked at my config
to see what I changed the sourec-ip value to. I believed that I had set
it to the FortiGate's LAN IP address. I was surprised to find that it is
currently set to:source-ip : 0.0.0...
OK, I found the Wifi logs in the FGT web console: Log & Report -> Event
Log -> WiFi However, I still can't find these events through the
FortiCloud interface.
Good stuff! Thanks Bromont!Bromont wrote:When the channel changes you
should see an entry in the Wifi Events logs like this: oper-channelAP
FP320B3X1300XXX radio 2 operating channel 11 ==> 6. I can't seem to find
any 'Wifi Events logs'. Can someone p...
