I am trying create a Layer2 VPN between 2 sites. Both sites have FGT60D
version 6.0.5. Both sites have dynamic publicIP, but site2 is behind a
NAT-device. I used this wizard:
https://kb.fortinet.com/kb/viewContent.do?externalId=FD40170&sliceId=1Tunne...
Hi, I am fighting with setting up a VPN between a Palo Alto 220 and a
FGT 60D.Some details:FGT 60D: Dynamic IP (FQDN) and located behind a
NAT'ed device. FortiOS 6.0.3PA220: Dynamic IP (FQDN) and no NAT. OS
9.0.2 It seems like Phase1 is up, but Phase...
I have a FGT60D running 6.0.3. I have connected a Huawei E3372h-153 for
failower WAN."diag test app lted xx" indicate no error, but wwan
interface is down and I am not able to go online with the stick. What
could be my problem? Yngve
After upgrading from 5.4.x to 6.0.3 I am not able set keepalive enable
on phase2 anymore. I have compared the old and new configuration, and
the VPN-config is the same (expect the keepalive-config). Any idé why it
is gone and any alternative commands...
I have a strange issue. - Two locations (on different continent)
connected via ipsec-vpn. - Both sites have FGT60D os 6.0.3- The
tunnelinterface have assigned IP-address (Local/Remote) with subnet
255.255.255.255-mask- The remote site have some polic...
I still have problem with this E3372h-153In the meanwhile the FGT60D is
upgraded to 6.0.5.
https://docs.fortinet.com/document/fortigate/6.0.5/handbook/836394/setting-up-your-supported-lte-modemIn
this article it write about a menu-option "Network-Mod...
Here is the config:Fortigate 60D: config vpn ipsec phase1-interface edit
"vpn_pp36pa220" set type ddns set interface "wan1" set keylife 28800 set
mode aggressive set peertype one set proposal aes256-sha512 set localid
"fgt60d@mydomain.eu" set dhgrp 1...
Thanks; http gives no issues, so my guess is also that it is on
https-level. I will follow you suggestion but concider to start with
re-issuing the ssl-certifcates. Best regards Yngve
