Yngve0
New Contributor II
‎11-16-2021
Last activity: Nov 16, 2021 10:50:22 AM
40 Profile 40% Complete
Most Liked Posts Recent Solutions
No Content Available

User Activity

I am trying create a Layer2 VPN between 2 sites. Both sites have FGT60D version 6.0.5. Both sites have dynamic publicIP, but site2 is behind a NAT-device. I used this wizard: https://kb.fortinet.com/kb/viewContent.do?externalId=FD40170&sliceId=1Tunne...
Hi, I am fighting with setting up a VPN between a Palo Alto 220 and a FGT 60D.Some details:FGT 60D: Dynamic IP (FQDN) and located behind a NAT'ed device. FortiOS 6.0.3PA220: Dynamic IP (FQDN) and no NAT. OS 9.0.2 It seems like Phase1 is up, but Phase...
I have a FGT60D running 6.0.3. I have connected a Huawei E3372h-153 for failower WAN."diag test app lted xx" indicate no error, but wwan interface is down and I am not able to go online with the stick. What could be my problem? Yngve
After upgrading from 5.4.x to 6.0.3 I am not able set keepalive enable on phase2 anymore. I have compared the old and new configuration, and the VPN-config is the same (expect the keepalive-config). Any idé why it is gone and any alternative commands...
I have a strange issue. - Two locations (on different continent) connected via ipsec-vpn. - Both sites have FGT60D os 6.0.3- The tunnelinterface have assigned IP-address (Local/Remote) with subnet 255.255.255.255-mask- The remote site have some polic...
Kudos from