Hello Everyone, I am trying to work on ZTP with Fortimanager. I was able
to add model device in Manager and was able to push device setting
automatically when device came up. However, The Policies were not pushed
automatically (Pushed them manually)....
Hi maschimidt,assuming you have site 2 site tunnel,You can build another
tunnel to customers secondary WAN with the same settings and monitor the
Primary tunnel from backup tunnel. That way Backup tunnel will only come
up when primary goes down . Tha...
Hi lhsit , You cannot have secondary IP address when interface is in
DHCP mode. I would use another port as WAN and assign static on it.
Thanks , Oscar
that's strange. This worked for me every time. Another options is ,
create a loopback interface and add VIP to it. In policy allow ICMP only
from your trusted host. Thank You, Oscar
do you have DNS server set to your local dns in your SSL VPN settings?
#config vpn ssl setting set dns-server1 set dns-server2
you can also set via GUI from your SSL VPN settings.
Thank you in Advance
Hi, I see you have a policy for LAN to TELE network but do not see a
reverse policy. Try adding a policy from TELE network to your LAN and
move them all the way up. Thanks
