Normally, if you set up a VPN using VPN Manager in Forti Manager and
have "Phase2 per Protected Subnet Pair", it will set the local and
remote subnets as 0.0.0.0. I need to have it actually specify the remote
and local subnets. I am able to configure...
I saw several similar problems on this forum, but not exactly like
this.So, I have: ISP1, ISP2 ,ISP3 links. First two are in sd-wan mode.
And I used it for surfing. ISP3 used for business network. My branch
office used vpn site to site, and connect o...
Hi all, I have problem with several objects on FortiManager:These
objects I used for SSL-VPN and I decide that remove that option.So I
remove SSL-VPN settings, and also all settings in policy package but
when I trayremove users, user groups and LDAP ...
This Help:Go to Policy&Object -> Object Configruation -> Tools ->
Display option-> Check allAfter that, Go to CLI only objects > search
for userChoose local CLI configuration >search for the user you want to
remove
This solution 2. is helped, so I must create new sd-wan zone with only
ISP3, first zone (ISP1+ISP2). In static route I have: 0.0.0.0 ->
zone10.0.0.0 -> zone2with same priority, in sd-wan rules I have rules
for local traffic to go over zone1. Thanks
Dear Ken, I export internal_ca FROM Checkpoint Trusted_CA and import to
Fortinet. I saw that certificate like CA_Cert_1. I also config user peer
and set CNBut I Still receive same error. See attached picture.I didn't
understand you about that, what y...
