Hi Guys,Thanks for the Forum it is super helpful and has helped me with
other problems that I have had.For this particular problem I have spent
quite a bit of time reading through the posts on the fortinet forum and
the various cookbooks to find out ...
Not sure if I ever found the correct config on this but the ISP was
accommodating and changed my main WAN subnet to a /29 WAN subnet so I
had the extra IP addresses that I needed. Now I at least have port
forwarding working as I wanted, but just not ...
Thank you very much for the answer. So I thought "could I even make it
work on the current WAN1 address?" and I found that when I set up port
forwarding to the WAN1 address of 12.12.12.230 it worked straight away
and I could SSH in!So at least I was ...
Thank you Toshi for the fast answer!So not assigning additional subnet
to the WAN1 makes sense and I removed this.Then should I assign a LAN
inside with the IP address 5.5.5.225/29 and the server that I am trying
to port forward to the address of 5.5...
You are leaving our website
You are leaving our site and we cannot be held responsible for the content of external websites
