Hi, for one of our customers I need to make a package of FortiClient for
silent install. So I was wondering if this is possible? Installation
should be complete with the tunnel configured. Thanks for any
suggestions! Regards,
If it tries to resolve the FortiGuard addresses, it is using them
somewhere. And as you say yourself: without license that won' t work. If
you' re only using the manual URL-filter, the FortiGate should not try
to resolve to FortiGuard. Are you sure y...
The file is downloaded to the firewall first, scanned for viruses and
other stuff there and then forwarded to your client. If you want to
change this, you can either: - reduce the comfort client interval
(and/or let a larger amount of bytes pass thro...
Hi Ede, I didn' t express myself correctly. What I meant is that there'
s probably a diag command that triggers the firewall to send a test trap
of some kind.
Hi and welcome, there' s probably a diag command to start sending snmp,
but I don' t know it by heart. What you can always do, is start a
sniffer via the CLI to find out if the firewall is sending out
SNMP-traffic (command: diagnose sniffer packet an...
Couple of things: - first of all the IP of your DNS-server is in a
private range, thus cannot be routed on internet. You need a VIP on your
FortiGate from an public IP to that private IP to be able to reach your
DNS-server from internet. - your VIP n...
