I'm setting up a new Fortigate 70D and have a basic problem connecting
to the internet. It seems like a pretty simple setup and I would
appreciate some help. It's running in Standalone/NAT mode. wan1 is
connected directly to a Cisco wifi-router/cable...
ede_pfau wrote:Or it could be that the FGT is in the modem's "DMZ", that
is, all traffic is handed through without routing or any other
alteration. Then, traffic with a private source address is going out to
the internet where it dies... Could you tr...
toshiesumi wrote:Since it's going out through wan1 with the source IP
you set, the problem is on the cable modem/router not on the FG. You
mentioned the FG didn't get DHCP IP somehow. That sounds fishy to me. I
agree. I suspect the cable modem. It st...
Thanks Toshi and Mike.First, here's what I got on the diag when I tried
to ping from a second admin session:FGT70D3Z1500xxxx # diag sniffer
packet any 'host 8.8.8.8' 4interfaces=[any]filters=[host
8.8.8.8]52.457666 wan1 out 192.168.0.9 -> 8.8.8.8: ic...
Thanks Bob. I don't think that's the issue. FYI, this is a Cox Business
Internet with one public dynamic IP and one public 29-bit block. The
cable modem DHCP assigns 192.168.0.10-192.168.0.129 on the internal
side. The FG70D won't pick up an IP from ...