Hello,i have some trouble with policy routing.I have try to paint my
setup to the picture.Virtual IP and nat and policy all working when i
use static route but when i change to policy routing it doesn'twork and
i didnt see my fault. here my Policy ro...
Hello,it is possible with a fortigate fw to config more than one port in
the same subnet ?i need more than one ip and more then gig ethernet to
connect with other network but i don´t have access to the other switch
so that i can´t use lacp thanks.
so real live ip are a little bit different but still the same problem
the debug show me this: id=20085 trace_id=193 func=print_pkt_detail
line=5311 msg="vd-root received a packet(proto=6,
172.19.135.205:43524->172.21.92.163:80) from port24. flag , se...
my problem was that traffic that come from vlan1 go sometimes out off
interface24 and sometimes go to interface18thats why i play with policy
routingwhen i start a http request to interface24 to address
172.21.22.30 mapped to vip 10.0.0.1 and go to v...
hello, thank you for the answer. yes the vip‘s are on the fortigate. ok
then i only need static route and forbid http traffic on interface 18
and only allow port 22 and on interface 24 allow port 80 http and deni
port 22
You are leaving our website
You are leaving our site and we cannot be held responsible for the content of external websites
