Hello Guys, I have Fortigate 100D installed on multiple sites, and
everything is working. Only difference is that some firewalls have Lan
port (which goes to internal network) as L3 Physical Interface with
static IP whereas other firewalls have L2 ty...
Hello Guys, I have some questions , I am doing vlan Design and add on
wireless vlan where i can untagg my FortAPs .My confusion is that
FortiAPs are using CAPWAP tunnel to reach Firewall , so does seperate
vlan for these Aps make any difference or no...
Hello Guys, My Firewall having v5.2.1 build 742 and i am not able to
find supported upgrade steps for this build model. I was reading this
doc but there is nothing for this
build.http://kb.fortinet.com/kb/microsites/search.do?cmd=displayKC&docType=kc...
No VdomsBoth firewalls have exact same sort of working, Only somebody
choose Physical in INTERFACE TYPE option while configuring port . On
other firewall somebody choose Hardware switch in INTERFACE TYPE.
I already aware of these modes and our all firewalls are configured with
NAT mode , but still some firewall LAN port is configured as L2 port and
some are L3 ports. still confuse ?
hello Toshi, Yeah, I have single vlan for Wireless (Acesspoints + Staff
SSID ), I am going to use two SSIDs , Guest and staff. For Guest SSID, I
will use tunnell mode and set the DHCP scope on Firewall. For staff
SSID, I want to use Same wireless vla...
