Hi all, I have Fortigate 100D with Dual WANWan 1 : 90% weighted load
balanceWan 2 : 10% weight load balance I want to do policy routing as
below Source IP address : 0.0.0.0/0.0.0.0Source Interface :
LanDestination address : 96.45.36.96 Outgoing inter...
Hi, I want to implement Internet Access Authentication with FSSO polling
mode. I have follow the
cookbookhttp://cookbook.fortinet.com/fsso-polling-mode/ But still not
success. Even My PC is join domain it still prompt for username/password
could anyo...
Hi, I have tried to implement LDAP Authentication , right now I'm able
to add LDAP servers and I can test successful. I'm able to fetch DN and
see the users from AD server. But right now i'm facing with problem, it
seem like it can fetch DN (When I p...
Hi, I want to control user access to internet by creating LDAP
authenticationI'm not quite sure where I have to use this LDAP.Thing
I've done so far1.Create LDAP server (Test Successful)2.Create user
group (Firewall Type, and choose remote server to ...
Hi all, I want to allow access to www.9gag.com ,right now it been
blocked by web filter under category other adult material I try to allow
access by config rating overidesas belowand then allow it in web filter
profiles , but somehow it still block a...
Hi Fishbone, Thank you for your information. I implement this in test
environment. this solution will deploy for small size office, so I start
with polling mode. I try the debug from your command as below output
--------------------------------------...
Hi , now am able to get for the prompt authenticationI forget to put the
authentication in my proxy security profiles. But when I put my
username/password (join domain name) it could not pass the
authenticaiton, only the account that I use for LDAP q...
Hi, I follow your instruction this is my security policy config FGT_HA_2
# show firewall policy 1 config firewall policy edit 1 set uuid
8a53c544-3bc3-51e5-4279-90090cb380f8 set srcintf "port1" set dstintf
"wan1" set srcaddr "My_network" set dstaddr ...
Hi, I already modified my security policy (internal to WAN) , I
specified the source users to be user group (group I create to authen
with LDAP) and source address to be none (previously source address is
set to any) and set action to be Accept. But ...
