This is diagram of my infrastructure: VDOMs Public have internet access,
VDOMs Secure not. For now VPN IPsec work correctly but only between
VDOMs Public. Generally the current configuration works as in the
diagram but I have problem with connect VDO...
This is diagram of my infrastructure:VDOMs Public have internet access,
VDOMs Secure not. For now VPN IPsec work correctly but only between
VDOMs Public. Generally the current configuration works as in the
diagram but I have problem with connect VDOM...
Hi, I have used two CISCO routers so far.The first router provided
access to the internet and for the first segment of the network. Behind
this router was a second one (behind NAT), which was a network
separator. I would like to implement this config...
Hello, I need to create VPN IPsec S2S tunnel with certificate
authentication. What i need in Subject and Key Usage/Enhanced Key Usage
in that certificate? For now i use certificate with address IP in Common
Name and Client/Server Authentication (Enha...
Picture from first post shows the working configuration, so: 1. i have
IPsec connection between Public VDOMs who has access to internet2. i
have working Inter-VDOM routing (Public - Secure) To be done:1.
Inter-VDOM routing through IPsec tunnel and co...
Look again on diagram on first post. Ping from which pub vdom? ;) I need
to connect on both ways: 172.1.255.0/24 with 172.2-4.255.0/24
172.2.255.0/24 with 172.3-4.255.0/24 172.3.255.0/24 with 172.4.255.0/24
Ok, I have improved VDOM-Link configuration. I had no address (it was
0.0.0.0/0.0.0.0). However, I don't quite understand the routing you
wrote. Which interface should these entries be configured on? For now on
site B, VDOM Secure I add:Dst 0.0.0.0/0...
There is progress :) But i can ping only in one way. VDOM_Public- has
internet access - this is ok- has access in VLAN_Public - this is ok-
not have access to VLAN_Secure - not ok :( VDOM_Secure- not have
internet access - this is ok- has access both...
