firewall & Syslog are accessible from each other, can ping & take ssh.
but Syslog is not able to fetch any log from the firewall config log
syslogd setting set status enable set server "10.1.0.10" set mode
reliable set facility local0end above is the...
I want to get information about user login & logout in a day Using SSL
VPN. I found one fort cloud Reports but that could only show total time,
not the login -logout Please help anyone who know how to export login
logout VPN reports Note : don't have...
getting request time out isp gateway & traffic gets forward to next-hop
my question is there any we can hide that or make anything that it shows
request timeout. ping is working fine to ISP gateway We have Vdom in
firewall on other VDOM tracers show ...
We have 2 domain controller active & both having FSSO client installed
as well as the collecter agent. The issue is few users facing random
internet loss issues while working, it works fine after logout-login or
restart. Note: these are mine finding ...
Hi Alivo thanks for the information, 1. I can't do it as many users are
active right now, I will try to do it on the weekend. 3. Multi-user PC
are there but they don't log in at the same time, each user works in
different shifts. (no 2 user login at ...
Thanks ShawnZA for the quick reply, the local firewall is off on all the
computers so all ports are open, But but I suppose they don't have
access to WMI Service that I need to confirm with my server engineer.
any possibilities for this issue to happ...
right you can't allow & block in same policy. did you move policy at the
top as firewall read policy from top to bottom 1st policy will be taken
into consideration & next to that even if its deny it will not block
traffic as allow policy is above it ...
hi, am not an expert but here what i suggest 1)you can create at service
name custom_block_port in objects & security tab then in that service
mention the port range for both TCP 28298-28298 & UDP 28298-28298,
2)create new deny policy mention & menti...
i have setup DMZ in my company directly on firewall port with totally
different ip range (you can connect switch to it and use as many system
you like). this way it will be separate from your local network. make
the necessary policy as required. Note...
