Hi,like you can see from image attached i've two different servers
connected to my fortigate 100D on two different internal port. So i've
192.168.3.0/24 on port 3 and on port 4 i've defined many VLAN and there
is a VLAN called VLAN 70 that has 172.16...
Hi, i've set a vpn ipsec tunnel from my fg 100D to a huawei firewall.
I've set an ipsec (interface mode) and it works, tunnel it's working.
But if i try to ping from my side to remote side i've only an icmp
request from me but not a reply from remote...
Hi, i'm trying to create an ipsec tunnel everything it's fine.Tunnel is
up correctly, both phase1 and 2 are correctly done.But from remote side,
they ask me that they want that i've to translate my local IP before
enter in the tunnel. So i've find th...
tanr wrote:I think that looks right. You're just trying to ping the host
on VLAN70 from the host on port3 and it fails? Is it possible you're
hitting another security policy before this one and the ping is getting
handled/blocked by that?What do the ...
ede_pfau wrote:I've noticed the strange routes as well.In words:- the
default route (to the internet) is pointing to VLAN306(might be, maybe
VLAN306 is a subinterface of wan1)- the next hop gateway is the public
IP of the other site you are trying to...
Thanks for your answer, so now i've setting vpn (interface mode) ipsec.
On phase 2 i've used natted ip (my public) on local address. i've also
set policy but i cannot receive any response from remote side :#
diagnose sniffer packet "VPN 1"interfaces=...
