I' ve been working on this problem for a week now. I' ve spoke to
Fortinet support and they comfirm my setup on the Fortigate is correct.
Here' s what I have. Network 1 Subnet 10.1.3.0/24 SSL VPN Subnet
10.1.4.0/24 Network 2 Subnet 10.1.2.0/24 I want...
I realize this is a 1yr old post but this fit a problem we were having
exactly. I figured it out so i wanted to post my results here. We're
running a Fortigate 60E with v5.4Here's the command I ran in order to
make the firewall stop running packets t...
I' m adding this for my own reference in addition to anyone else who may
have ran into this problem. Hopefully google will pick this up so 3
years from now when I' ve forgotten how I solved this I can remember
with a simple google search. The solutio...
It doesn' t have a static route for 10.1.3.0 or 10.1.4.0. The only thing
i can assume is it builds the routs dynamically based on the IPSec P2
config which specifies 10.1.3.0 and 10.1.4.0. As far as the Cyberguard
SG580 (now Mcafee) goes I' ve never ...
Its not sending the packets back. The problem is why is it working on
the 10.1.3.0 subnet? Both 10.1.3.0 and 10.1.4.0 are running across the
same IPSec connection. If 10.1.4.0 won' t work then 10.1.3.0 shouldn' t
work either.
Yes I have a group specifically for my portal users ip range. I' m
getting an ip address in the 10.1.4 range when i connect via SSL VPN. As
to the policies I went over them several times and Matthew from
Fortigate support also looked over them with m...
