I need to configure VXLAN in the presence of Fortinet configured with
SD-WAN and multiple WANs. Resolved by following the community KB below:
https://community.fortinet.com/t5/FortiGate/Technical-Tip-VXLAN-with-SD-WAN/ta-p/198690
Hello everyone,I am in the following configuration. I have 3 VLANs
(which will grow in the future) which host servers offering services (1
per VLAN).These Servers have configured a VIP One to One, and on the
policy an IP Pool with the same IP as the ...
@Anthony_E wrote:Hello, Could you put back your issue and share the
solution?It could help people who will face the same. Thanks a lot in
advance. Regards,Hi Anthony,done. In the end I solved it by following
the guide that was already present on the ...
Hi @ozkanaltas ,here the output of commandid=20085 trace_id=1
func=print_pkt_detail line=5955 msg="vd-h-services:0 received a
packet(proto=1, 10.127.X.X:5->209.227.X.X:2048) tun_id=0.0.0.0 from
VLAN-XX. type=8, code=0, id=5, seq=85." id=20085 trace_i...
Hi @AEK ,no I did not, as it would be inconvenient with the increasing
number of VLANs to make the N rules to allow all other VLANs.Is there
any way to make it work without doing these N rules? ThanksRegards
Hi @ozkanaltas ,here the output of the commands: id=20085 trace_id=1
func=print_pkt_detail line=5955 msg="vd-h-services:0 received a
packet(proto=1, 10.127.22.101:5->209.227.211.X:2048) tun_id=0.0.0.0 from
VLAN-22. type=8, code=0, id=5, seq=85." id=2...
