Dear All I have been battling for some time already with a point of
configuration and i feel i am missing something (certainly silly) to
make it work. I hope you can help me see what i am missing The HW: 1
Fortigate 140D-POE (V5.2.6, build 711) The s...
Hello everyone I have installed not so long ago a FG140D-POE in a rather
cool environment (temps range between 5C and 10C all year long)Hoever i
have the feeling the fans are always at max or close to, which produces
quite some vibration and noise (e...
Hello everyone I am all new to Fortinet and FortiGate, though i am a
quite old Networks "user" Right now i am in the process of swapping a
Juniper SRX100 with a Fortigate 92D and a Juniper SRX240 with a
Fortigate 140D-POE (+FAP321C)In general i find ...
Hi Toshi Thanks for having tested!Right now i am a bit overwhelmed with
eventsI hope to try the 5.4 in the coming weeks on a FG140D I'll let you
know as soon as i have had a chance to test :) BestAndy
I second Toshi :) It's exactly because i come from Juniper and Cisco HW
that i was expecting a similar behavior in regards of L2 handling It's
nothing that cannot be worked around but i believe that having a proper
L2 handling could greatly simplify ...
Hi ede_pfau in regards of the WLAN i have 3 subnets to route through a
single port therefore i supposed the VLAN approach was the easiest I am
not sure how to route 3 segregated subnets to the WLAN with 3 different
SSIDs otherwise I don't have the Fo...
Thank you very much for your answer Toshi EsumiI guess then that i will
have to double the number of subnets for LAN and WiFi From what you
wrote i have then to assume that it is the same for the Aggregate
Interface... It has to use its own subnet (w...
You are leaving our website
You are leaving our site and we cannot be held responsible for the content of external websites
