Hi Guys,I am testing a setup with 2 x 80F in two branches ( A and B)
connected back to Hub (C) via an Ipsec tunnel.The local LANs behind the
branches can ping the hub local lan through the tunnel . Also I
configured a second phase2 selectors to allow...
Hi Fellows,Got a FortiGate in a very remote site with 2 x WANs over
Starlink ( 3rd WAN over 4G but not in use at the moment) and 4 overlay
IPsec tunnels . Wanted to load balance traffic over the IPSec tunnels.
But it seems it does not work as excepte...
I have nothing connected to /29s. I have done a change where I marked
the static route towards the wan interface with higher priority by
making it less preferable to the tunnel interface and it's working. my
final testing will involve connected physi...
