Hello, I have connected a Fortigate 70F and Fortiswitch 180F together
through fortlink and the switch is authorised+online. When I navigate to
Fortiswitch ports there is no way for me to edit the ports, why could
this be?
Hello, I currently have a hub and spoke SDWAN solution, using ADVPN,
IBGP and SDWAN rules to steer traffic across the overlay or breakout
locally across the internet. I need to add another Hub that will provide
access to more infrastructure and adver...
I have a Fortigate firewall with x2 VDOMs, root and user created called
"management access". root and management access have an inter-vdom link
between them to exchange traffic and because of the requirements root is
the "management vdom" and used as...
I have configured a default route via a SDWAN zone for Internet breakout
traffic, this consists of two internet connections. The default route
via this SDWAN zone is not being populated in the routing table, both
interfaces are up and working. For te...
Hello,I am trying to prepare templates in CLI form to deploy at sites.
My configuration is complete, but when downloading the entire
configuration from a Fortigate firewall it is not ordered correctly to
be added to the cli. As an example, tunnel int...
I don't think Dual Region would suit my environment because Hub1 and
Hub2 will have the same spokes, whereas the Dual region suggests spokes
are unique to the region.
I can see the ping reply and request on the customer vdom, but still
timing out on the client. x.x.x.9 being the vdom link ip and x.x.x.30
the client source address. diag sniffer packet
11interfaces=[11]filters=[none]7.517933 x.x.x.30 -> x.x.x.9: icm...
Yes I am pinging/ssh the opposite vdom's, vdom link and I can see return
traffic on the source vdom firewall logs, but the ping times out on the
client.
Hi, Thanks for your quick response. So I have a site to site VPN, that
lands in my "Management access" VPN. I have policy from the tunnel
interface to the local inter vdom link allowing the traffic. Because the
root inter vdom link is on the edge, I ...
