I have been provided by my ISP a non-consecutive selection of IP' s.
66.18.202.151-158, excluding .153 Also I need to point one of those IP'
s at a second router. I am using a 80CM as the primary, and a 50C as a
secondary. What interface configuratio...
If it' s a standard Windows PPTP connection, in the advanced TCP/IP
settings of the connection, uncheck the " Use default gateway of remote
connection" option, and it will route your internet stuff locally.
ORIGINAL: ede_pfau Don' t worry. Sorry, Bob, sure there' s a difference
when you assign network masks of different sizes. You (Owain) mentioned
that the 80CM' s wan1 port carries a /27 netmask whereas the secondary
router carries a /24 netmask. The e...
ORIGINAL: rwpatterson ORIGINAL: Owain Deagle The primary router (80CM)
has 66.18.202.151/255.255.255.224 on WAN1, with some VIP' s to route
mail/http/https to the mail server. In reality this router only needs an
IP for management, and an IP to pass ...
ORIGINAL: ede_pfau Hi, you should only assign one IP address to your
FGT' s wan1 port, and use the others in VIPs (virtual IPs). Use of
secondary IP addresses is recommended against as this would prevent
anti-spoofing control. Your public IP range is...
You get that error if you try to move a policy in relation to an ID from
another grouping. For example, moving a policy from Wan->Lan to
Lan->Wan.
