Dear sir, Is it possible to out all the lan traffic through wan WITHOUT
NAT for internet through cisco router connected to wan of the Fortigate
firewall.NAT in cisco router for internet , and all the traffic coming
in for Fortigate lan from cisco rou...
Dear sir, If I connect the interface 2 (port 2) to a switch with POE and
inside switch if i connect an wireless access point everything works
fine and i can ping the ip of access point also i can do web manage the
access points with one access points...
Dear sir, Can i get explained and if possible for profile policy with
NAT DISABLED.Actually i want to allow traffic through WAN interface
without translating the source address.That is allow traffic through
from LAN to WAN and keep the source address...
Dear Sir, Is there is any option like identity nat in cisco. that is for
a particular destination source ip should be nat to itself and
destination ip too. so that if traffic going for internet it will be
nat. but if traffic for particualer destinati...
Dear sir, our LAN = 192.168.1.0 /24WAN = 37.99.167.26WAN is connected to
another cisco router vlan1 = 37.99.167.25 LAN user are getting internet
through WAN of fortinet 60D.Cisco router are configure with GRE
tunnel.from router we can reach other sid...
Yes sir if we connect the all the APs to port 1 lan port via poe switch
which is hardware switch port it is working perfectly. All the devices,
pc, printer mobile etc every thing working fine. I wanted to connect APs
in different port so that we can ...
Dear Sir,I did not understand "disconnect FGT", what did FGT stand for.
Also i am giving each APs a static ip according to the interface subnet
and DG as interface ip. Thanks and best regards.
