Hi! I have a site-to-site VPN setup to our client from location A. I
want to be able to access client's network from location B through
existing tunnels: B->A->Client. There is no tunnel between location B
and the client, only between locations A and...
Hi! I have several 100Ds that experience quite similar issues. When I
log in to them locally (Switch->MGMT port) I have no problems at all. On
the other hand, every time I want to sign in from outside (through port
4443 (I changed the standard one)) ...
Hi! I'm not sure if I maybe overthinking it, but is there a way to map
an external IP in location A to an internal IP in location B over
site-to-site VPN tunnel? I believe Ext IP has to be allowed in location
B's firewall, correct? Unless, I can some...
Hello Everyone! I would appreciate if someone could shed some light on
my issue with IPSec VPN tunnel. I have a pretty simple setup: Local
Network (10.110.0.0/16), AWS VPC (172.10.10.0/24), and 100D firewall. I
downloaded configs from AWS and build 2...
azh wrote:Hello, What device are u using in client side ? You can try
use FG100D(location A) as a next-hope router for client and
FG100D(location B). And include client subnets for FG100D(location B)
and vice versa, also don't forget to configure pol...
Still can't get it to work. Would someone be able to pin point me at
what am I doing wrong here? Seems like Selective hasn't been back online
since his last reply.
Thanks Selective! I understand the concept but for whatever reason I
can't make it to work. Here's what I'm doing:Site A is 10.100.0.0/16
(allows all 192.168.1.0/24 traffic through the tunnel). External IP
170.171.172.173Site B is 192.168.1.0/24 (all...
Hi! Sorry for resurrecting this old thread but it looks like I'm having
similar symptoms between Fortigate 100D and Amazon VPC. In Log &
Report->VPN Events every now and then I see negotiate failure messages
"progress IPsec phase 2", Direction=inboun...
ede_pfauIf you mean this address "169.254.X.X" then it's not APIPA - it
is /30 ends of the tunnel, which were provided by Amazon. Thanks
everyone for your suggestions, I finally got it working. Here's what I
did:I double-triple checked my config and ...
