| Solution |
For any managed FortiSwitch, when we execute the below command on the FortiGate, it is possible to see this field called 'dynamic-capability'.
This parameter shows what features switch supports and its non-configurable value.
The value differs for switch model, it is not possible to change the value.
FG200E (root) # show switch-controller managed-switch S248EF
# config switch-controller managed-switch
edit "S248EF"
set name "core2"
set fsw-wan1-peer "fortilink"
set fsw-wan1-admin enable
set poe-detection-type 2
set version 1
set max-allowed-trunk-members 8
set dynamic-capability 0x0000000000000000000027757dddbff7
FG200E(root) # config switch-controller managed-switch
FG200E (managed-switch) edit S248EF
FG200E (S248EF) get
.
.
dynamic-capability : igmp-snooping,dhcp-snooping,mclag,qos,network-monitoring,sticky-mac,netflow-ipfix,per-port-storm-control,erspan,rspan,lldp-vlan-assignment,quarantine,source-guard,bounce-port,lldpmed,dot1x,access-vlan,bulk-stage,bpdu-guard,stp-root-guard,port-mac-limit,sflow,acl,vlan-policer-qos,led-diag-flash,igmp-snoop-proxy,aggregator-mode,self-sign,dot1x-auth-server-timeout,nac,dsl,lan-segment,
|
