Technical Tip: FortiMail SNMP OID for power supply status

mtse · ‎02-01-2024

Description

This article describes that FortiMail, following SNMP OID can be polled to check the power supply status. By design, PSU status is NOT supported on hardware platforms below FortiMail-2000. For those platforms that do not support such OID, the 'not-present' result will be returned by the FortiMail.

Scope

FortiMail.

Solution

fmlHwSensorEntIndex

Index of the hardware sensores

.1.3.6.1.4.1.12356.105.1.110.2.1.2

fmlHwSensorEntValue

Reading value of the sensor

1.3.6.1.4.1.12356.105.1.110.2.1.3

snmpwalk -v 1 -c public 10.10.10.10 .1.3.6.1.4.1.12356.105.1.110.2.1.2

SNMPv2-SMI::enterprises.12356.105.1.110.2.1.2.1 = STRING: "ps1"

SNMPv2-SMI::enterprises.12356.105.1.110.2.1.2.2 = STRING: "ps2"

snmpwalk -v 1 -c public 10.10.10.10 .1.3.6.1.4.1.12356.105.1.110.2.1.3

SNMPv2-SMI::enterprises.12356.105.1.110.2.1.3.1 = STRING: "present"

SNMPv2-SMI::enterprises.12356.105.1.110.2.1.3.2 = STRING: "present"

The FortiMail MIB files can be downloaded from the Fortinet support portal by the procedure in the related Knowledge Base article:

FORTINET-CORE-MIB.mib

FORTINET-FORTIMAIL-MIB.mib