|
Connected devices are not able to get an IP address from DHCP server configured on FortiGate's interface and get the following error.
SC-FG100F # [debug]locate_network prhtype(1) pihtype(1)
[warn]Can't locate subnet in shared network of packet and packet is not a DHCPREQUEST and htype(1) != intf htype(1)..dropping
[debug]locate_network prhtype(1) pihtype(1)
This could be because vci-match is enabled and vci-string is configured on that interface’s DHCP server.
For example:
config system dhcp server
edit 1
set dns-service default
set default-gateway 10.2.2.131
set netmask 255.255.255.0
set interface "port3"
config ip-range
edit 1
set start-ip 10.2.2.133
set end-ip 10.2.2.133
set vci-match enable
set vci-string "FortiSwitch"
next
In this example, devices that match vci-string 'FortiSwitch' only would be able to connect otherwise will not get an IP.
The solution would be to either disable the vci-match or configure an appropriate vci-string.
config system dhcp server
edit 1
config ip-range
edit 1
set vci-match disable
end
end
Related document:
VCI pattern matching for DHCP assignment
|
