| Description | This article describes how to connect FortiDDoS to FortiManager and troubleshoot connectivity issues. |
| Scope | FortiManager v7.2.4 and FortiDDoS v6.6.3. |
| Solution |
Section 1: FortiDDoS and FortiManager firmware compatibility. As a General Rule, FortiManager must run a firmware release integrable with FortiDDoS.
Note: For more detail, see the 'Compatibility with FortiDDoS' document for FortiManager: FortiDDoS
FortiManager v7.2.4:
Enable FortiAnalyzer Features on FortiManager (be advised this option of FortiAnalizer inside FortiManager will have some limited Features. **For Full Features/ custom reports will be required to integrate FortiDDoS with a real Fortianalizer** ).
FortiDDoS v6.6.3:
Validate Hardware supported by FortiManager if it is a VM instance:
diagnose dvm supported-platforms list diagnose dvm supported-platforms list FortiDDoS
Section 2: Verify FortiManager configuration on the FortiDDoS.
Go to FortiManager and authorize the FortiDDoS:
Section 3: Verify FortiDDoS and FortiManager connectivity. Create a test NTP profile and delete them on FortiDDoS to generate logs to FortiManager.
Capture logs:
Run on the FortiManager CLI, FDD's IP 192.168.91.55:
diag sniffer packet any ' port 514 and host 192.168.91.55' 3
Run on the FortiDDoS CLI:
diag sniffer packet any ' port 514 ' 3
Create an NTP profile test and delete it on the FortiDDoS.
FortiManager will show the related logs from FortiDDoS:
|
