Description | This article describes how to enable Radius Authentication debug on version 6.5. |
Scope | FortiAuthenticator v6.5+. |
Solution |
In the previous versions it was possible to see the detailed radius authentication process and steps by just accessing the URL https://<FAC_IP>/debug/radius/ as shown in the following image:
On FortiAuthenticator v6.5, the debug is disabled by default. Therefore, the information above will not be displayed.
1) To activate the debug, it is necessary to select 'Enter debug mode':
2) The detailed process will be recorded and available to download:
- When the logs are collected, it is necessary to stop the debug.
3) Select 'Enter detail debug mode' and then 'Exit debug mode'.
|