Technical Tip: Understanding SLA Target Map

Wallerson · 12-05-2024

Description This article describes what happens when changing the 'hif-queue-customize' parameter in an HA environment. Scope FortiGate NP7 models. Solution Changing 'hif-queue-customize' requires a reboot to take effect. In an HA cluster, both units...

Wallerson · 10-07-2024

Description This article describes how to erase and add a new FortiOS image to the Non-Active partition. Scope FortiGate. Solution The following output shows two different images on each partition: FortiGate # diagnose sys flash listPartition Image T...

Wallerson · 09-02-2024

Description This article describes how to use ADVPN Shortcut column in the VPN logs. Scope FortiGate v7.2 and above. Solution The ADVPN Shortcut column is hidden by default. It is useful for troubleshooting in the Spokes to identify which tunnel is t...

Wallerson · 08-13-2024

Description This article describes the meaning of the SLA target field displayed via CLI. Scope FortiGate v7.4. Solution The sla_map field is displayed when the Lowest cost (SLA) strategy is selected in the SDWAN rule. To see the field, run the comma...

Wallerson · 08-12-2024

Description This article describes how to use 'diagnose sys profile report'. Scope FortiGate v7.0 and above. Solution The 'diagnose sys profile report' command is a hidden command that may be highly useful to troubleshoot high CPU issues, mainly duri...

User Statistics

User Activity

Technical Tip: Changing hif-queue-customize in an HA environment

Technical Tip: How to upload FortiOS image to the Non-Active partition

Troubleshooting Tip: ADVPN Shortcut column