Technical Tip: How to allow only one channel for YouTube filter

[tonylin1]

Description	This articles describes how to allow only one channel for YouTube filter.
Scope	FortiOS 7.0.6 or later.
Solution	Below are the requirements: Deep inspection. Deep Inspection on HTTPS. Set up a YouTube filter. config videofilter profile     edit "Allow-Youtube"         set youtube-channel-filter 1     next end config videofilter youtube-channel-filter     edit 1         set name "Allow-Youtube"         set default-action block             config entries                 edit 1                     set action allow                     set channel-id "UCbDEamSXQhxqhovhd2NdEyg" => only allow this youtube channel                  next             end         set log enable     next end Setup firewall policy. x.x.x.x is the source IP address. config firewall policy     edit <policy id>         set name "111 test"         set uuid d2295b40-684e-51ec-db47-d6a39437baa3         set srcintf "lan"         set dstintf "wan1"         set action accept         set srcaddr "x.x.x.x"         set dstaddr "all"         set schedule "always"         set service "ALL"         set utm-status enable         set inspection-mode proxy         set ssl-ssh-profile "custom-deep-inspection" => deep inspection for TCP 443         set videofilter-profile "Allow-Youtube"         set logtraffic all         set capture-packet enable         set auto-asic-offload disable         set nat enable     next end Related document: Get the channel ID for video filtering