Hi All, I'm tired of beating my head against this wall and am hoping one
of you may have a sledgehammer or wrecking ball I can borrow. The use
case is as such: PLC vendor needs access to specific VLAN on our network
so they can remotely manage their ...
Pretty much what is in the title of the thread. I have a filter on a 60C
(firmware 5.0 GA Patch 7) that I've been trying to make changes to. For
example Cabela's is blocked under Weapon (Sales) which was blocked when
it shouldn't be for that site and...
That did it. Everything I read stated to not have NAT enabled on the
policy so it didn't occur to me that I would need to change that. Thanks
for the help!
Okay, so here's the results from that.. 2016-04-07 10:19:01 id=13
trace_id=434 msg="vd-root received a packet(proto=1,
10.10.20.101:1->172.22.5.2:8) from 172 VPN_0."2016-04-07 10:19:00 id=13
trace_id=433 msg="allocate a new session-18317071" 2016-04-...
Hi Jeff, Unfortunately this isn't giving me any data to work with. On
the firewall I set up the flow filter and enabled showing the flow on
the console and ran "diag debug flow trace start 20" (it threw an error
if i didn't make it start rather than ...
