Hi, I have Fortigate 60F and two ISP added to SD-WAN: WAN1 WAN2 I would
like always to route traffic from Interface "3" (Subnet 192.168.0.0/24)
to ISP "WAN2" and never failover to ISP "WAN1". If "WAN2" is down then
clients on Interface "3" will be of...
For the time being found three options how to block traffic originated
from subnet 192.168.0.0 (port3) to be routed via WAN1 port even if WAN2
is physically down (cable unplugged): 1) Found on this resource
absolutely the same issue what I
have:https...
Hello, Made numerous tests. 1) When both links are UP with connectivity
-OK, then routing table is below:Current Routing Table 2) Configured two
Route Policies. First to redirected traffic from Subnet_B via WAN2 only,
and second policy to stop Policy...
Hi, that won't work for my case. "Stop Policy Routing" only tells if
there is a traffic match then exit from Policy Route and look at Routing
Table. So in my case if WAN2 is down then routing table will have
default route via WAN1 interface. If I con...
As per documentation in order to Policy Route work we need to provide at
least two parameters:-Outbound interface-GatewayOn WAN2 interface we
have Starlink aerial. When it is offline it has Gateway 192.168.100.1
and when is online 65.181.7.1 in curre...
