Hello,we have different sites connected between us via three vpn ipsec
with different isp using sd-wan and static routing.We want to move from
static routing to bgp and started some test on one vpn using the normal
neighbor configuration and all is w...
Hello,I have to design a network based on sdwan, ibgp and advpn
technology by the book, but using three hubs instead of the classical
two.It is possible to implement advpn based on three hubs?Thank you all
Vincenzo Stolfi
Hi,I'm working on new Fnac 7.6 deployment.I need only visibility
functions, in particular I need to associate user/host/ip address and
see all in fortiview.It is necessary the persistent agent or I can
retrieve the information in another manner ?Also...
Hi,I set a wifi guest with self-registration and otp sent via sms using
Fortisms license using Fortiauthenticator.There is a method to send an
alert when Fortisms license is about to end? For example send an
email?.Thank you all in advance. Vincenzo
Hi all,I try to understand how to access Fortiauthenticator via cli for
troubleshoot dns resolution.I check via putty the port is open, but I
don't have permission to access with full permission user.I need to
execute a simple dns lookup and ping to ...
Hi All,I set the configuration and is working using FW1 with
neighbor-group and FW2 with normal neighbor.For link selection I set for
all firewalls local-pref in with set match-interface and prepend out
also with set match-interface.###FW1###config r...
Hi all,I do some test this morning and understood the issue.First I'm
not using the loopbak interface as update-source to simplify the
architecture.I set the a neighbor group only on fw2 with network-range
the ip 10.255.254.1 (peer ip of FW1 on vpn i...
Hi all,I want clarify that I need to use neighbor-group because I have
to configure more than one connection between two site, at list 20 sites
x 3 vpn ipsec actually managed via static route.What I need to
understand first is, in network-range what ...
Hi @atakannatak thank you so much for your reply.I will start with
customer a lab to test the solution with three hubs and three spoke and
surely I will use your post as starting point. Also I will implement
shortcuts to enhance performace.I will kee...
Hi,I solved the ip and host resolution enabling dhcp helper address, now
I need to understand if is mandatory to use persistent agent to
associate user to host or there is alternative methods.Regarding the
helper address implementation, it's working ...
