I want to test the diversion function of SDWAN. My fortinet has two wan
ports. I add wan1 to the SDWAN area, and the default route is wan2. Then
tracert checks the effect on PC, and the result shows that the data is
forwarded by wan2 according to the...
here is my route,I found that I had to set a default route whose next
hop was the egress corresponding to the SDWAN area. Because I wanted to
set some specific traffic to go out from the SDWAN area, this default
route could not take effect. If I did ...
Thank you for your reply. After I added the lan3 port to the sdwan area,
the sdwan rule worked, but I did not change the default route to SD-WAN
interface; now I really want to know what is the prerequisite for the
SDWAN rule to work, and his judgmen...
I checked the configuration and did not find any problem. The following
is my configuration. The default is lan3(10.0.0.2). I want to use sdwan
to send Google icmp traffic out of wan(172.16.1.254), but it does not
take effect。 FortiGate-40F # get rou...
You are leaving our website
You are leaving our site and we cannot be held responsible for the content of external websites