Hello everyone, I was trying to make a Windows Deployment Services
server working in my infrastructure with my Fortigates.We have two
different interfaces: One for the servers and another one for the
Clients Computers.I did a lot of tests and it's wo...
Hello, I configured as the manual an IPsec Tunnel to be able to connect
the remote clients to the LAN. I was thinking then to restrict the
firewall rules (users can access to servers, others users no). But that
seems to not working when I put a user ...
Hello, I drew something to be more understandable. Basically, I would
like from the Mikrotik LAN, access to the servers connected at the
"Fortigate Server", passing through the "Fortigate Main" IPsec tunnel.I
don´t know if it's possible, that's why I...
Hello, SITE A : Mikrotik HAP AX2SITE B: Fortigate 60F I successed to
create an IPsec tunnel between a Mikrotik HAP AX2 and a Fortigate 60F.I
configured the Site A to be in full remote browsing through the
Fortigate. Site A connects to internet throug...
Hello, I have 2 sites with fortigates connected by IPsec, both can reach
each other.I wanted to know if there is a possibility to be connected
with Forticlient at the site A, and be able to reach site B ?I tried to
do a Firewall policy from the Site ...
Hello, after all my tests worked in my Hyper V VM, I thought everything
would be easier with the physicals computer. but IT'S NOT I tried
different types of PC that we have, and I have an error, It stays stuck
at "Setup is starting" and then the "DHC...
I found the solution, next-server and filename are not the options to
use. I had to create a dhcp relay in my dhcp server, pointing towards
the WDS server. In the WDS server, uncheck all boxes for DHCP listening.
Hope It will help someone else: Have...
I'm almost sure that I need to configure something else to have clients
from the 16.0 LAN works as the clients from the 17.0 LAN ... The
configuration of my Fortigate DHCP server on the LAN Clients interface:
config system dhcp serveredit 1set dns-se...
Hello @xshkurti, many thanks for your quick answer. Sorry, I completly
forgot to tell that we are using fortigate as DHCP server. We have for
example the LAN Clients 16.0/24 and LAN Server in 17.0/24The DHCP server
is configured on the LAN Clients in...
