We expanded a subnet at a remote site and traffic from our main site to
addresses in the new part of the remote subnet does not work. I have the
correct subnet mask on the routes and on the IPSec VPN tunnel. I see the
traffic in Forward Traffic being...
Bit of a breakthrough, I found that 10.10.10.1 DOES exist on the remote
site router as the dmz interface. I changed that address and the traffic
tried to go to the new address, so that IS where it's getting that from.
Our dmz is tied to a physical po...
These all look healthy, except the diag debug flow, which gives the
following:id=65308 trace_id=1861 func=print_pkt_detail line=5879
msg="vd-root:0 received a packet(proto=1, MY IP:1->192.168.111.38:2048)
tun_id=TUNNEL IP from VPN TUNNEL NAME. type=8...
When I tried sniffing the ping traffic, some of my pings actually went
through- about one in eight of them. The trace only showed anything on
the pings that actually went through and came back and what it showed
was correct. Then I did another tracer...