Hi All: I have a FG100a running 3.0 MR6 patch 3 running in NAT mode. I
have all 5 interfaces configured (60 workstations on internal with DHCP
configured) and in use and would like to create a new VLAN that I could
configure to attach a wireless acce...
Hi All: I have an FG100-A configured as a DHCP server on my internal
network. I have some of the logging turned on and am seeing entries in
my log files with IP addresses of my windows clients. I do not have an
internal DNS server nor are the machine...
I noticed the 111C has dual Gig WAN ports but the internal switched
ports are still 10/100. If my workstations and servers support gigabit
Ethernet, as well as the switches behind the FG will I still get gig
Ethernet performance even though my FGs In...
Thanks for the help Abel. I like your idea about using a text editor on
an existing backup of the current config. I assume this means I remove
all other config entries from the edited file (not associated with the
current Internal) so as to only add ...
Thanks for the quick reply Abel. My serial number starts with
FG100A39075. Does your reference to rev 2 mean all serial numbers
starting at FG100A2905 and above? Currently under Status-Network I have
only two buttons: " Create New" and " Switch Mode....
Thanks for the replies. An indirect way to tell who may be on which IP
(when using dhcp) is by logging IM sessions and correlating screen names
with IP addresses however IP address does not show up in the IM logs.
Anyone know of a way to add it? Than...
